ZERO ONE STICKLESS [All-Button] Rev2 Clear/White Case Kit

The product image is Rev1.

This arcade stick case is made of acrylic.
It features the ability to customize it to your own taste with the necessary parts.
A wide variety of options are available, from the layout of the top panel to the height of the side panels.
You can easily create your very own original arcade stick!

Size is 395mm x 230mm (W x D) Height is variable with options.
The top and bottom are made of two layers of 3mm and 5mm to sandwich printed artwork.

Customers need to assemble the case by themselves. Case only sold.
Levers, buttons, PCBs, and harnesses are not included.

20% OFF artwork when you purchase artwork and STICKLESS at the same time.

If you have the artwork ready to go, purchase at the same time and save.
After you add the STICKLESS [All-Button] to your cart, you can add your ZERO ONE STICKLESS custom art order to your cart.
You will receive a 20% discount at checkout.

5% off all the parts you need if you purchase a bundle set.

When you purchase in a bundle set, you can freely combine the necessary parts for assembly in a selection system without hesitation, and you can also purchase at an additional 5% discount.
For those who want a pre-assembled set, a [assembled] bundle set is also available.

Rev2 appeared with fine-tuned layout

Based on feedback, we have fine-tuned the layout.
Please refer to the images below for details.

Rev1	Rev2

Glossy white panel configuration

Composed of white, ZERO ONE comes with clear panels on the top and bottom to sandwich and protect the artwork.
The white panel is constructed of 5mm acrylic, while the clear top and bottom protective panels are 3mm panels.

STICKLESS Type

Instead of the joystick levers that are so popular today, this All Button layout uses only buttons for all operations.
If you want to use levers later on, you can purchase a top panel to use the lever type.

Side Panel Size

The height of the side panel should be selected according to the lever and button to be specified.

40mm :
Sanwa JLF series and GamerFinger buttons fit.
Seimitsu's LS-32 series andLSX-NOBI-01 seriescannot be installed.
terminals when using Sanwa and Seimitsu buttons.need to be bent slightly.When using Sanwa and Seimitsu buttons, it is necessary to bend the terminals a little.
The lower center of gravity provides greater stability.

45mm: 
Compatible with all Seimitsu levers. (LSX-NOBI-01 series is also acceptable)
Sanwa JLF series are also available, of course.
All GamerFinger, Sanwa, and Seimitsu buttons can be used without any problem.
Standard height.

50mm:.
For Korean Lever and Golden Lever.
Other: For those who need more height or are considering special applications.

Bit Bang Gaming Player LED OPTION

Player LEDs (sold separately) and Brook Fighting Board series
When connected to a console such as PS4, the LEDs can visually indicate the connection position of 1P, 2P, etc.

The top panel offers a 3mm laser-cut option optimized for use with Player LED light pipes.
All models can take advantage of this option, but all-clear models do not necessarily require this option.

By selecting the option, all Zero One models can have four holes in the center of the top of the panel.

Will you be using PS4+Audio/NEUTRIK?

Normally, the hole for the USB mounter on the side panel is 21mm.
This is not the case for the USB-C to A-mount jack This is because it is designed for use with
However, when using the Brook PS4+Audio Fighting Bord or NEUTRIK, a 24mm + threaded hole is required.
If you are considering these configurations, please select "YES" for the optional "USE PS4+ Aaudio/NEUTRIK" question.

Included accessories

acrylic panels for the main unit x5
screws for main body x8
long nuts for main body x4
screws and nuts for PCB board x2set
Spacers for PCB board x2
Case feet x4

Assembly Guide

ZERO ONE FIGHTSTICK
https://akecon.games/blogs/guide/zero-one-build

ZERO ONE STICKLESS
https://akecon.games/blogs/guide/zero-one-stickless-build

ZERO TWO FIGHTSTICK
https://akecon.games/blogs/guide/zerotwo-installguide

ZERO TWO STICKLESS
https://akecon.games/blogs/guide/zero-two-build

Parts Guide

Description of parts required for assembly.

PCB Bord

The PCB Bord manufactured by Brook is required.
Click hereYou can purchase it from here.

Harnesses

20pin joystick/button harness or Brook Fighting Board Cable
Either one is required.
If you are using the 20-pin joystick/button harness4-Pin L3/R3/Touchpad Button Harnessis also required.

For the All Button layout, you will needConversion harness for 5-pin All-Button or One additional Brook Hitbox Cable is also required.

USB Mounter

USB C to A Mount Jack or one mounter such as NEUTRIK is required.
This is needed to connect the PCB Bord to the main unit.

USB cable

To connect PCB Bord to USB Mount Jack or NEUTRIK, you will need either a USB2.0 A to B cable 25cm
or USB 2.0 A to B right angle cable 50cm One of the following is required
If the A to B cable is 25cm or longer, it is fine.

If you are using the USB C to A Mount Jack
You will need one USB A to USB C cable of USB 2.0 or higher to connect the main unit to a game console, PC, etc.
If you have one for charging smartphones or other devices, you can use it.

Action Buttons：
Both snap-in and screw type are available.

Optional Buttons：
Since the thickness of the acrylic panel to be installed is 5mm, the screw type is recommended.
It is also possible to install the screw type, but it may be easier to pull out depending on the brand used.

In addition, a lever is required for Fightstick.

About acrylic panels

Due to the nature of acrylic, it has low resistance to alcohol and other chemicals.
Do not use alcohol solvents when cleaning the product.
Also, be aware that the acrylic may be damaged if dropped or subjected to excessive impact.